This blog is an effort to support Unicall Asterisk driver. Steve is probably dropping support for chan_unicall in Asterisk, so I will try to keep up to date the driver using OpenPBX/CallWeaver driver code as a base.
Moy
This blog is an effort to support Unicall Asterisk driver. Steve is probably dropping support for chan_unicall in Asterisk, so I will try to keep up to date the driver using OpenPBX/CallWeaver driver code as a base.
Moy
At this moment chan_unicall for Asterisk 1.4 has a problem (at least in Mexico) where you cannot receive calls from phones that block their CallerID unless you disable CID all together in unicall.conf by setting ANI to 0 in the protocol variant. This means that you should not use it on a production server unless you are willing to live without CallerID or do not wish to receive calls from operators like Nextel which block CID.
Carlos,
Just to clarify. The problem you had is not because of chan_unicall. Is because of missmatching versions of spandsp and libunicall. Many problems arise when mixing up versions of libunicall, spandsp, libmfcr2 etc.
I configured asterisk with package astunicall-1.4.9-0.1.tar.gz, card sangoma A101. But I have problem, system run one more time caller could not call in system .
tucson roofing Contractor…
Welcome « Asterisk Unicall…